...
- row 1- switch 7 ON
- row 1- switch 8 ON
- row 2- switch 7 ON
- row 2- switch 8 ON
Baud Rate
- 115200 bps
To change the baud rate to 115200bps you can follow the below instructions:
1. Turn Epson OFF / make sure Epson is turned OFF
2. Turn Epson ON whilst holding the feed button down
3. Receipt Prints -> Release feed button
4. Again, hold down feed button until receipt prints -> Release feed button
5. Press Feed button three times and then hold on fourth press until Receipt Prints -> Release feed button
6. Again, Press Feed button ten times and then hold on eleventh press until Receipt Prints -> Release feed button
7. Press feed button one time and then press one more time and hold until Receipt Prints -> Release feed button
8. Press feed button
...
seven times and then press one more time and hold until Receipt Prints -> Release feed button
...
9. Final Receipt should say...
...
Baud Rate
115200bps
...
Set Up Process
DO NOT PLUG IN USB BEFORE DOWNLOADING DEVICE DRIVERS
1. Download and install the virtual port driver:
TM-T88V-II: https://support.epson.net/setupnavi/?PINF=swlist&OSC=WS&LG2=EN&MKN=TM-T88VII
...