This page is underconstruction
Ticket printer BOCA
What are the components you need ?
USB cable
Power supply cable (CH cable)
USB Hub with power supply
How to plug ?
1) USB CABLE
Plug USB cable to HUB USB
Plug the other end of this cable to the BOCA
2) POWER SUPPLY CABLE
Plug the power supply cable to the BOCA and in eletrical slot
Switch on the button power
How to configure on the device ?
1 )Configure In Windows
When you have connected the printer, this one is automatically find by Windows, your printer is ready
Open the configuration printers, enter "printers"
Click on the printer and Manage
Identify your printer (If the name contents BIDI, you have the new version of the drivers)
If this case we should follow the futur steps
Click on printer properties
Click on "Ports" and uncheck "Enable bidirectional support"
This step is very important, if this case is checked it could cause some issues with Secutix
2) Configure in SecuTix
Logon to Secutix
Click on "Workstations" (menu Organisation parameters > Initialisation)
Fill in "Name" and "Code" and click on "DETECT DESK"
Click on the drive to save the configuration
Click on "Hardware"
Click on "Hardware" and "New"
Fill in the fields, and click on "Next"
Fill in the fields, and click on "Next"
Save and close
Your printer is now active in Secutix
3) Paper insertion
You can insert the paper, the black mark should be at the bottom on the right
When it is ok, the printer would move forward on the length of a ticket, and go back.
This operation uses to measure the size of the note, if the paper continues to advance the black mark has not detected, and the paper may be in the wrong direction.
Finalize tests
1) In Windows
-
2) In Secutix
Pre-required a box office with a product and a ticket template have configured.
Print a ticket from the box office.
Multi-Touch ELO
What are the components you need ?
USB cable
Power supply cable (CH cable)
How to plug ?
-
How to configure on the device ?
No needed to Re-Align the screen
How to configure in Windows ?
Download the driver of the screen : http://support.elotouch.com/download/Drivers/DriverDownload/default.aspx
Double click on EloSetup.exe
Accept the installation agreement and proceed with the installation process.
Once installation is complete, both USB and PulseTouch drivers will be installed
You should uncheck theses box to disable the sound from the screen.
How to configure in SecuTix ?
No configuration needed